Cambridge Forklift Training Schools

Cambridge Forklift Training Schools - Reasons Why People Who Operate A Forklift Need to Take Whatever Of Our Forklift Training Schools

If you are looking for work as a forklift operator, our regulatory-compliant lift truck training Schools offer exceptional instruction in many types and styles of forklifts, lessons on pre-shift check, fuel kinds and handling of fuels, and safe use of a forklift. Hands-on, practical training helps those participating in obtaining fundamental operational skills. Program content consists of current rules governing the use of forklifts. Our proven forklift courses are intended to provide training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

When the lift truck is in operation, do not lower or raise the forks. Loads should not extend above the backrest. This is due to the risk of the load sliding back in the direction of the operator. Inspect for overhead obstructions and make sure there is adequate clearance before raising a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it back slightly.

The lift truck is less stable if a load is in a raised position. Ensure that no one ever walks under the elevated fork. The operator should not leave the lift truck while the load is lifted.

The forks should be level when handling pallets, and high enough to extend all the way into and beneath the load. The fork's width must provide even distribution of weight.

Chock the wheels and set the brakes before unloading and loading the truck. The floors should be strong enough to support the weight of both the load and the forklift. Fixed jacks can be installed in order to support a semi-trailer which is not attached to a tractor. The entrance door height should clear the height of the forklift by at least 5 cm. Edges of docks, rail cars and ramps should be marked and avoid them.

Click to Download the pdf